Techniques for the production of multicrystalline silicon are more simple, and therefore cheaper, than those required for single crystal material. However, the material quality of multicrystalline material is lower than that of single crystalline material due to the presence of grain boundaries. Grain boundaries introduce high localized regions of recombination due to the introduction of extra defect energy levels into the band gap, thus reducing the overall minority carrier lifetime from the material. In addition, grain boundaries reduce solar cell performance by blocking carrier flows and providing shunting paths for current flow across the p-n junction.
It used to be thought that large grain crystals were the most suitable for multicrystalline silicon solar cells since larger crystals meant fewer grain boundaries. However, in recent years it was found that smaller grains gave lower stress at the ground boundaries so they were less electrically active (lower recombination). Presently, most multicystalline silicon for solar cells is grown using a process where the growth is seeded to produce smaller grains and referred to as "high performance multi"1
To avoid significant recombination losses at grain boundaries, grain sizes on the order of at least a few millimeters are required 22元微信红包小扫雷群. This also allows single grains to extend from front to back of the cell, providing less resistance to carrier flow and generally decreasing the length of grain boundaries per unit of cell. Such multicrystalline material is widely used for commercial solar cell production.
- 1. , “Development of high-performance multicrystalline silicon for photovoltaic industry”, Progress in Photovoltaics: Research and Applications, vol. 23, no. 3, pp. 340 - 351, 2015.
- 2. , “Electronic processes at grain boundaries in polycrystalline semiconductors under optical illumination”, IEEE Transactions on Electron Devices, vol. ED-24, pp. 397-402, 1977.